Cisco has released a Virtual Wireless LAN Controller (vWLC), a VM version of a controller that has always been an appliance or hardware module, with 60-day evaluation at installation. Your first thought might be less hardware cost and a WLC can take all the advantages of being a VM. Cinch 1 1 Keygens. 1000 Megapixel Photo Download. For those of you who like to lab, like myself, but always have difficulty getting your hands on a WLC, this may seems like a great news that you can now have a WLC readily available for testing.
Well, this is very true as long as you have thoroughly reviewed the and understand all the requirements and limitations, otherwise, you may find out the hard way that things may not work the way you expected them to. In this article, we will point out two important caveats that you need to be aware of in order to have a vWLC setup and functioning correctly. Please refer to the for pre-requisites and detail installation steps. Wic Reset Key Free Download. You can watch a vWLC installation video at Caveat #1: Access point (AP) needs to have software version 7.3 As described in the deployment guide, vWLC does not use Manufacturing Installed Certificate (MIC), but instead use a Self Signed Certificate (SSC) and only an AP running 7.3 will accept the SSC. If the AP is one of the models shown in the following table that does not have the software version specified under the “Last Support” column, the chances are it is supported. If you try to register an AP running prior software release, you will see a certificate error and fail registration messages. The following is a sample output from a 1131 AP that failed to join using LWAPP and went into booting loop.